top of page

Compressor-cooled incubator ICP260

 

Standard delivery Compressor-cooled incubator

With the help of our model selection, with dimensioned model sketches and extensive technical data for download, you can find the right cooled incubator ICP for your needs. For small volumes and for work predominantly in the proximity of the ambient temperature, the Memmert Peltier-cooled incubator is recommended. Flexibility and technical features of our appliances meet all possible needs. Put us to the test!

 

Temperature

Setting temperature range-12 to +60 °C
Working-temperature rangefrom -12°C up to +60°C (Optimum performance of cooling aggregate at an ambient temperature of +16°C up to +34°C. Not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over.)
Setting accuracy temperature0.1 °C
Temperature sensor2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

 

Control technology

ControlCOCKPITTwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language settingGerman, English, Spanish, French, Polish, Czech, Hungarian
TimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAITthe process time does not start until the set temperature is reached
Calibrationthree freely selectable temperature values
adjustable parameterstemperature (Celsius or Fahrenheit), fan speed, programme time, time zones, summertime/wintertime

 

Communication

Documentationprogramme stored in case of power failure
ProgrammingAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

 

Safety

Temperature controlmechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
Temperature controlover- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETYadditionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic systemfor fault analysis
Alarmvisual and acoustic

 

Heating concept

Air jacketair jacket heating system for gentle all-around heating
Heating conceptno drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Coolingenergy-saving use of CFC-free cooling/heating system (refrigerant R134a)
Defrostinghighly efficient automatic defrosting system

Standard equipment

Doorfully insulated stainless steel door with 2-point locking (compression door lock)
Internals2 stainless steel grid(s), electropolished
Works calibration certificatefor +10°C and +37°C
Doorinner glass door

 

Stainless steel interior

Dimensionsw(A) x h(B) x d(C): 640 x 800 x 500 mm (d less 33 mm for fan)
Volume256 l
Max. number of internals9
Max. loading of chamber200 kg
Max. loading per internal20 kg

 

Textured stainless steel casing

Dimensionsw(D) x h(E) x d(F): 824 x 1552 x 684 mm (d +56mm door handle)
Installationon lockable castors
Housingrear zinc-plated steel

Electrical data

Voltage Electrical load230 V, 50 Hz
approx. 1200 W
Voltage Electrical load115 V, 50/60 Hz
approx. 1200 W

 

Ambient conditions

Set UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature15 °C to 28 °C (up to 34 °C with limited temperature range)
Humidity rhmax. 70 %, non-condensing
Altitude of installationmax. 2,000 m above sea level
Overvoltage categoryII
Pollution degree2

 

Packing/shipping data

Transport informationThe appliances must be transported upright
Customs tariff number8419 8998
Country of originFederal Republic of Germany
WEEE-Reg.-No.DE 66812464
Dimensions approx incl. cartonw x h x d: 930 x 1760 x 930 mm
Net weightapprox. 157 kg
Gross weight cartonapprox. 214 kg

 

Standard units are safety-approved and bear the test marks

Compressor-cooled incubator ICP260 Memmert

SKU: ICP260
€7,833.75Price
  • IVA no incluido.

  • A consultar.

Página del producto: Stores_Product_Widget
bottom of page